D-Link DIR-514 - Ipv6 over Ipv4 Tunnel

32D-Link DIR-514 User Manual
Section 3 - Conguration
IPv6 over IPv4 Tunnel
Select either Obtain DNS server address automatically or Use
the following DNS address.
Enter the settings supplied by your Internet Service Provider (ISP).
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable the autoconguration feature.
Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless
DHCPv6.
Enter the IPv6 address lifetime (in minutes).
DNS Setting:
IPv6 in IPv4
Tunnel
Settings:
Primary/
Secondary DNS
Addresses:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable
Autoconguration:
Autoconguration
Type:
Router
Advertisement
Lifetime: