D-Link DIR-514 - L2 TP (Username;Password)

15D-Link DIR-514 User Manual
Section 3 - Conguration
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the L2TP IP address supplied by your ISP (Static L2TP only).
Enter the subnet mask supplied by your ISP (Static L2TP only).
Enter the gateway IP address provided by your ISP (Static L2TP only).
Enter the server IP address provided by your ISP (optional).
Enter your L2TP user name.
Enter your L2TP password and then retype the password in the Verify
Password box.
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Address Mode:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
Username:
Password:
Reconnect Mode:
Maximum Idle
Time:
Choose L2TP (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses an L2TP connection.
Your ISP will provide you with a username and password. This option is typically used for DSL services.
L2TP (Username/Password)