D-Link DIR-514 - System Settings

50D-Link DIR-514 User Manual
Section 3 - Conguration
Use this option to save the current router conguration settings to
a le on the hard disk of the computer you are using. First, click the
Save button. You will then see a le dialog, where you can select a
location and le name for the settings.
Use this option to load previously saved router configuration
settings. First, use the Browse control to nd a previously save le of
conguration settings. Then, click the Load button to transfer those
settings to the router.
Click the Restore button to restore all conguration settings back
to the settings that were in eect at the time the router was shipped
from the factory. Any settings that have not been saved will be lost,
including any rules that you have created. If you want to save the
current router conguration settings, use the Save button above.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
System Settings