D-Link DIR-514 - Tools and Status

46D-Link DIR-514 User Manual
Section 3 - Conguration
Enter and conrm the password that the admin account
will use to access the router’s management interface.
Check this box to enable remote management. Remote
management allows the DIR-514 to be congured over the
Internet through a web browser. A username and password will
still be required to access the Web-Management interface.
Enter the Internet IP address of the PC that has access to the
router. If you enter an asterisk (*) in this eld, then anyone will
be able to access the Router. Adding an asterisk (*) into this
eld could present a security risk and is not recommended.
This is the port number used to access the router. 8080 is the port
usually used for the Web-Management interface.
Admin
The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access while users
only have read-only access. Only the admin has the ability to change both admin and user account passwords. After modifying any settings, click
Save Settings to save your changes.
Admin
Password:
Enable Remote
Management:
IP Allowed to
Access:
Port:
Tools
The TOOLS pages allow you to adjust various system setting for your router, such as
the system time, rmware, and custom schedules. To view the Tools pages, click on
TOOLS at the top of the screen.