14D-Link DIR-514 User Manual
Section 3 - Conguration
Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
Enter the IP address (Static PPTP only).
Enter the subnet mask (Static PPTP only).
Enter the gateway IP address provided by your ISP (Static PPTP only)
Enter the server IP address provided by your ISP (optional)
Enter your PPTP username.
Enter your PPTP password and then retype the password in the Verify
Password box.
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable auto-
reconnect.
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway
IP Address:
PPTP Server IP
Address:
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
Choose PPTP (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses a PPTP connection.
Your ISP will provide you with a username and password. This option is typically used for DSL services.
PPTP (Username/Password)
To Next Page
Loading...
