D-Link DIR-514 - Static IP

11D-Link DIR-514 User Manual
Section 3 - Conguration
Enter the IP address assigned to your network connection.
Enter the subnet mask.
Enter the default gateway.
Enter the primary DNS server.
Enter the secondary DNS server.
You may need to change the Maximum Transmission Unit (MTU) for
optimal performance. The default value is 1500.
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use
the Clone button to replace the Internet port’s MAC address with
the MAC address of your Ethernet card.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
MAC Address:
Choose this Internet connection if your ISP assigns you a static IP address. After modifying any settings, click Save Settings to save your changes.
Static IP