71D-Link DIR-615+ User Manual
Section 4 - Conguration
DMZ
This Demilitarized Zone (DMZ) feature directly exposes the client to the Internet, and is not
recommended in ordinary situations.
Enable: Toggle this switch to enable the DMZ feature.
Enable NAT
Loopback:
Toggle this switch to enable NAT Loopback. NAT Loopback allows
LAN devices to connect directly to the DMZ host by using the WAN
IP address
IP Address: If DMZ is enabled, specify the IP address of the DMZ host.
Click Apply when you are done.
To Next Page
Loading...
