96D-Link DIR-840 User Manual
Section 8 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented
packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the
proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).
Once you nd your MTU, you can now congure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (http://192.168.0.1) and click OK.
• Enter your username (admin) and password (should be left empty). Click OK to enter the web conguration
page for the device.
• Click on Setup and then click Manual Congure.
To Next Page
Loading...
