D-Link DIR-840 - Virtual Computer

59D-Link DIR-840 User Manual
Section 3 - Setup
Check the box to enable the Virtual Computer feature.
Enter the global IP address you wish to map to a local
IP address.
Enter the local IP address you wish to map the global IP
address to. Alternatively, select a local client from the
drop-down menu, and click the << button to copy its IP
address to the eld. When done, click Add/Update to add
the newly created virtual computer to the list.
Displays a list of the virtual computers already active.
Enable:
Global IP Address:
Local IP Address:
Virtual Computer List:
The Virtual Computer page allows you to map global IP addresses onto local IP addresses on a one-to-one basis.
Virtual Computer