42D-Link DIR-840 User Manual
Section 3 - Setup
STEP 1: Choose PPTP (Point-to-Point Tunneling Protocol) then
click on Next.
STEP 2: Give your VPN prole a name, and click Next.
STEP 3: Choose an Authentication Protocol (PAP, CHAP, or MSCHAP
v2), an MPPE Encryption Mode, and the VPN Authentication
Database you wish to use. Enter the username and password for
your database, and click Next.
PPTP VPN
STEP 4: Enter a VPN server IP and remote IP range, and click Next.
STEP 5: Click Next to restart the router. You have now completed
the VPN Wizard Setup.
To Next Page
Loading...
