D-Link DIR-840 - Advanced Wireless

69D-Link DIR-840 User Manual
Section 4 - Advanced
Set the transmit power of the antennas.
This enables 802.11d operation. 802.11d is a wireless
specication developed to allow implementation of wireless
networks in countries that cannot use the 802.11 standard.
This feature should only be enabled if you are in a country
that requires it.
WMM is QoS for your wireless network. This will improve
the quality of video and voice applications for your wireless
clients.
Check this box to enable Short Guard Interval (GI).
Enable this option to reduce interference from other wireless
networks in your area. If the channel width is operating at
40 MHz and there is another wireless network’s channel
over-lapping and causing interference, the router will
automatically change to 20 MHz.
Transmit Power:
WLAN Partition:
WMM Enable:
Short GI:
HT20/40
Coexistence:
Advanced Wireless
The Advanced Wireless page provides further wireless options. Each wireless band (2.4 GHz and 5 GHz) are congured separately.