D-Link DIR-840 - Guest Zone

72D-Link DIR-840 User Manual
Section 4 - Advanced
Check to enable the Guest Zone feature.
The schedule of time when the Guest Zone will be active.
The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your
own times in the Tools > Schedules section or click Add New.
Enter a wireless network name (SSID) that is dierent from
your main wireless network.
Check to allow network connectivity between the dierent
zones created.
Select the type of security or encryption you would like to
enable for the guest zone. Refer to “Manual Wireless Settings”
on page 35 for information about each wireless encryption
type.
Enable Guest
Zone:
Schedule:
Wireless Network
Name:
Enable Routing
Between Zones:
Security Mode:
Guest Zone
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones
will be separate from your main wireless network. You may congure dierent zones for the 2.4 GHz and 5 GHz wireless bands.