D-Link DIR-840 - Static Ipv6

50D-Link DIR-840 User Manual
Section 3 - Setup
Static IPv6
Select Static IPv6 from the drop-down menu.
For this section, enter the address settings supplied
by your Internet provider (ISP).
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN Link-Local Address.
Check to enable the Autoconguration feature.
Select Stateful or Stateless autoconguration.
For this section, if your ISP provided you with DS-Lite
information, enter it here.
My IPv6 Connection:
WAN IPv6 Address
Settings:
LAN IPv6 Address:
LAN Link-Local Address:
Enable
Autoconguration:
Autoconguration Type:
DS-Lite: