D-Link DIR-840 - System Management

79D-Link DIR-840 User Manual
Section 5 - Maintenance
Use this option to save the current router conguration settings
to a le on the hard disk of the computer you are using. First,
click the Save button. A le dialog will appear, allowing you to
select a location and le name for the settings.
Use this option to load previously saved router conguration
settings. First, use the Browse option to nd a previously saved
le of conguration settings. Then, click the Load button to
transfer those settings to the router.
This option will restore all conguration settings back to the
settings that were in eect at the time the router was shipped
from the factory. Any settings that have not been saved will
be lost, including any rules that you have created. If you want
to save the current router conguration settings, use the Save
button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot Device:
System
This section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.