D-Link DIR-840 - 6 Rd

55D-Link DIR-840 User Manual
Section 3 - Setup
6rd
Select 6rd from the drop-down menu.
Enter the address settings supplied by your Internet
provider (ISP).
Enter the IPv4 (remote) address here.
Enter the mask length of the IPv4 address.
Enter the remote prex of the IPv4 address.
Enter the length of the remote prex.
Enter the DNS server addresses.
Displays the LAN (local) IPv6 address for the router.
Displays the router’s LAN Link-Local Address.
Check to enable the Autoconguration feature.
Select Stateful or Stateless autoconguration.
My IPv6 Connection:
6rd Settings:
Remote IPv4 Address:
IPv4 Mask Length:
Remote Prex:
Prex Length:
Primary/Secondary DNS
Addresses:
LAN IPv6 Address:
LAN Link-Local Address:
Enable
Autoconguration:
Autoconguration Type: