D-Link DIR-840 - Ipv6 over Ipv4 Tunneling

53D-Link DIR-840 User Manual
Section 3 - Setup
IPv6 over IPv4 Tunneling
Select IPv6 over IPv4 Tunnel from the drop-down
menu.
Enter the settings supplied by your Internet provider
(ISP).
Select either Obtain DNS server address automatically
or Use the following DNS Address.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN Link-Local Address.
Check to enable the Autoconguration feature.
Select Stateful or Stateless autoconguration.
My IPv6 Connection:
IPv6 in IPv4 Tunnel
Settings:
IPv6 DNS Settings:
Primary/Secondary
DNS Address:
LAN IPv6 Address:
LAN Link-Local
Address:
Enable
Autoconguration:
Autoconguration
Type: