D-Link DIR-840 - Autoconfiguration

51D-Link DIR-840 User Manual
Section 3 - Setup
Autoconguration
Select Autoconguration (Stateless/DHCPv6) from
the drop-down menu.
Select either Obtain DNS server address
automatically or Use the following DNS Address.
Enter the primary and secondary DNS server
addresses.
Check to enable DHCP-PD.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN Link-Local Address.
Check to enable the Autoconguration feature.
Select Stateful or Stateless autoconguration.
Enter the IPv6 address lifetime (in seconds).
For this section, if your ISP provided you with DS-Lite
information, enter it here.
My IPv6 Connection:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
Enable DHCP-PD
LAN IPv6 Address:
LAN Link-Local Address:
Enable
Autoconguration:
Autoconguration Type:
Router Advertisement
Lifetime:
DS-Lite: