D-Link DIR-840 - Page 33

29D-Link DIR-840 User Manual
Section 3 - Setup
Select 3G from the drop-down menu.
In most cases you can choose Auto-Detection to get a
connection. Otherwise choose Manual and personalize the
settings below.
Choose the country where you get 3G service from the
drop-down menu.
Choose the telecom that provides your service from the
drop-down menu.
Choose the type of 3G network you have from the drop-
down menu.
Enter your 3G network user name, this is not always required
by your ISP.
Enter your 3G network password and then retype the
password in the next box. This is also not always required
by your ISP.
Enter the number your ISP gave you to dial for a connection.
Choose the type of authentication need to connect or use
auto detection.
If your ISP has given you an Access Point Name to use for
your connectivity, you may enter it here.
Select either Always-on, On-Demand, or Manual.
My Internet
Connection Is:
Dial-Up Prole:
Country:
Telecom:
3G Network:
User Name:
Password:
Dialed Number:
Authentication:
APN:
Reconnect Mode:
3G
Choose 3G if you are connection from a mobile wireless network with an ISP that uses a 3G connection.