D-Link DNR-322L

7D-Link DNR-322L User Manual
Section 1 - Product Overview
Hardware Overview
Front View
USB Port
Drive LED Power LED
COMPONENT DESCRIPTION
Power Button Press once to power on the NVR. Press and hold the button until the LED begins to blink to power down the NVR.
Power LED Power LED will blink when booting up, remain steady during normal operation.
Drive LED
These LEDs will be solid BLUE when the drives are connected but inactive. The LEDs will blink when the drives
are being accessed, formatted, or synchronized. They will illuminate AMBER if a drive has failed.
USB Port USB port for UPS status update.
Power Button