D-Link DNR-322L

45D-Link DNR-322L User Manual
Section 3 - Conguration
Type admin for the username and
leave the password field blank.
Click Exit Wizard to finish the auto search.
Click Login
Please connect your network camera(s) to network and power it on.
NVR will search for your available camera(s) in the local network (LAN) and add them to the NVR List in the NVR
automatically.
NVR will use the default login ID admin and a blank password to add a new camera(s).
If there are camera(s) found, NVR will start manual recording at the last step.
Note:
If you have an existing camera(s) with a different ID and password, NVR will add the camera(s) but you will not be able to
connect and record. You can change the settings in the NVR Setup page.
Auto Search Camera