43D-Link DNR-322L User Manual
Section 3 - Conguration
This section will show you how to configure your new D-Link NVR using the Web-based Configuration Utility.
To access the configuration utility, click the NVR name or IP on the NVR Search Utility or manually open a web browser
and enter the IP address of your NVR.
The Login screen will appear:
When logging into the NVR for the first time, you will be asked to choose a drive configuration type and format the drives.
There are four options: Standard, JBOD, RAID 0 and RAID 1. Standard configures each disk as a separate volume, while
JBOD combines both disks into a single volume. See page 52 for more details on using the RAID configurations.
Note: Refer to page 49 for instructions on how to change the password of your admin account.
Click Login
Web UI Login
Type admin in the user name field and
leave the password blank by default.
Select display language
To Next Page
Loading...
