D-Link DNR-322L

62D-Link DNR-322L User Manual
Section 3 - Conguration
Time and Date Setup
Manually Set
the Time and
Date:
Set Time From
My Computer:
Time Zone
Settings:
NTP Server:
Enter the complete time and date settings
manually. Click Save Settings to apply the
settings.
Click Set Time to have the NVR set its own
clock according to the time on your computer.
Select your time zone from the pull-down list.
Click Save Settings to apply the settings.
There are three choices for setting the
time.
Select or enter an NTP Server here. An
NTP Server is a server on the Internet that
maintains time. The NVR will contact the
server you entered and receive the correct
time. Click Save Settings to save your entries.