10D-Link DNR-322L User Manual
Section 3 - Installation
Windows
The following instructions show you how to set up the NVR using your Windows computer. If you are using a Mac computer,
go to Setup Wizard - Mac on Page 21.
Simply click Start to go through the Setup Wizard, which will guide you through the installation process from connecting
your hardware to configuring your NVR.
Setup Wizard
Note: The computer used to access the NVR web-based configuration manager must be on the same subnet as the NVR. If your network is using a DHCP
server, the NVR will automatically be in the same subnet.
To Next Page
Loading...
