D-Link DNR-322L

51D-Link DNR-322L User Manual
Section 3 - Conguration
Camera Setup
Step 1: Select the camera which you would like to modify.
Step 2: Modify its information on the top of the page.
Step 3: Click Save Settings.
Step 4: If you would like to replace a camera, select that camera, modify its address, port, user name, and password, and
then click Save Settings.
Camera Channel:
Vendor:
Auto Detection:
Select the number of analog cameras supported
by one video server from the list.
Displays the manufacturer’s name.
If you have already input the camera IP, you
may simply click this button to automatically
detect camera information (such as the channel,
protocol, vendor, and model number).
Note
Some cameras will limit the login authority to
the administrator only.