D-Link DNR-322L

61D-Link DNR-322L User Manual
Section 3 - Conguration
E-mail Setup
Server Address:
Port:
Use SSL:
Sender:
Subject:
Body of Message:
SMTP
Authentication:
User Name:
Password:
Send Testing Mail:
SMTP (Simple Mail Transport Protocol) server IP
address.
Specify the port number of the email server.
The default number is 25.
Check this if your email server uses SSL protocol.
Sender information.
E-mail subject.
E-mail content.
Provide the user name and password to the
SMTP server for identification before sending
e-mail.
Input the SMTP server login user name.
Input the SMTP server login user password.
Click this button and the system will send a test
mail to the sender. Please check it after testing.
Add Contacts
Step 1: Insert the name of a new contact.
Step 2: Insert the E-mail address of this new contact.
Step 3: Click Add Contact.
Step 4: Click Save Settings to save the new contact list.