D-Link DNR-322L

52D-Link DNR-322L User Manual
Section 3 - Conguration
Audio and Video
Step 1: Select the camera which you would like to modify in
the camera list.
Step 2: The NVR will display the parameters for the selected
camera. You can modify the information on this page.
Camera
Name:
Video Format:
Frame rate:
Resolution:
Quality:
Audio:
Go to Web:
The name of the camera.
Select the video format that the camera supports.
Select the frame rate.
Select the resolution.
Select the image quality.
Check the Enable Audio option for live view and
recording.
Click to connect to the web page of the selected
network camera for advanced setup. For example,
motion detection should be configured via the
camera web interface to enable the NVR to receive
the trigger message.
Step 3: Click Save Settings.
Note: The system will adjust the frame rate automatically based on the maximum frame rate which the camera can support.
This section will allow you to configure and modify the audio and video parameters for each camera.