79D-Link DNR-322L User Manual
Section 3 - Conguration
OSD (On-screen display) Setting
1. Check the Enable camera OSD option.
2. Set the foreground and background settings of the OSD.
3. Select which types of information will be displayed on the screen.
4. Click Apply to preview the result.
5. Click Default to go back to the default settings if necessary.
Monitor Display Setting
1. Select Primary channel which will always be on the screen when
activating auto scan; while select Secondary channel which has second
priority when activating auto scan. Enter the time interval for auto scan.
2. Select the screen division of NxN type.
To Next Page
Loading...
