D-Link DSL-2730E - Diagnostic Tests and System Log

DSL-2730E User Manual
The following table describes the parameter and button of this page:
Field Description
Host
Enter the valid IP address or domain name.
Ping
Click it to start to Ping.
3.4.4.2 Ping6
Choose Maintenance > Diagnostics > Ping6. The page shown in the
following figure appears. The target Address can be a domain or IPv6 address.
The following table describes the parameter and button of this page:
Field Description
Target Address
Enter an IP address for Ping6 diagnosis.
Interface name Enter an interface through which the Ping6
diagnosis is performed.
3.4.4.3 Traceroute
Choose Maintenance > Diagnostics > Traceroute. The page shown in the
following figure appears. You can track the route path through the information
which is from your computer to the other side host on the Internet.
84