D-Link DSL-2730E - Page 88

DSL-2730E User Manual
The following table describes the parameters and buttons of this page.
Field Description
Host Enter the destination host address for
diagnosis.
NumberOfTries
Number of repetitions.
Timeout
Put in the timeout value.
Datasize
Packet size.
DSCP Differentiated Services Code Point, You should
set a value between 0-63.
MaxHopCount
Maximum number of routes.
Interface
Select the interface.
Traceroute
Click start traceroute.
3.4.4.4 ADSL
Choose Maintenance > Diagnostics > ADSL. The page shown in the following
figure appears. It is used for ADSL tone diagnostics.
85