D-Link DVA-5592 User Manual

97D-Link DVA-5592 User Manual
Section 4 - Connecting to a Wireless Network
Connect a Wireless Client to your Router
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such
as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software
utility with WPS) that you can press to connect to the DVA-5592 router. Please refer to your user manual for the wireless device
you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DVA-5592 for about 1 second. The WiFi LEDs on the front will start to blink orange.
Step 3 - Allow up to 1 minute for your connection to be congured. Once the Internet light stops blinking, you will be connected
and your wireless connection will be encrypted with WPA2.
WPS Button

D-Link DVA-5592 Specifications

General

Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
LAN Ports	4 x Gigabit Ethernet
WAN Port	1 x Gigabit Ethernet
VoIP	Yes
Weight	500 g
DSL	VDSL2
Security Features	WPA/WPA2, Firewall
Antennas	Internal Antennas