D-Link DVA-5592 User Manual

122D-Link DVA-5592 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router.
Some rewall software programs may block a DHCP
request on newly installed adapters.

D-Link DVA-5592 Specifications

General

Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
LAN Ports	4 x Gigabit Ethernet
WAN Port	1 x Gigabit Ethernet
VoIP	Yes
Weight	500 g
DSL	VDSL2
Security Features	WPA/WPA2, Firewall
Antennas	Internal Antennas