D-Link DVA-5592 User Manual

13D-Link DVA-5592 User Manual
Section 3 - Conguration
WiFi-2.1 (5 GHz) (Cont)
Click Apply to save your changes, or Close to return to the previous menu without
saving.
Show Password: This option shows the password as you type it.
Management
Frame Protection
Select Enable to enable this feature. It is disabled by default.
Wi-Fi Protected Setup
WPS Enabled: Select Yes to enable Wi-Fi Protected Setup (WPS) as a quick-and-easy
way to setup an encrypted wireless network.
Conguration
Methods:
Select a WPS conguration method. As of this writing, the rmware
only supports WPS Push Button for security reasons.
Wi-Fi Clients Access
Access Control
List:
You can choose to ACCEPT or DENY wireless access to specic MAC
addresses. Selecting ACCEPT will allow access only to those devices
you specify, while selecting DENY will block specied addresses.
Only one rule can be active at a time.
MAC Addresses: Enter the MAC address of the client to which to apply your lter. Click
the "+" button to add additional elds, or click Reset to clear all elds.
Advanced
Conguration:
This option allows you to congure advanced wireless settings. This
section is for advanced users and network professionals only and
can be safely ignored by a majority of users.
Start WPS: Starts the WPS pairing process as though you had pressed the WPS
button on your router.

D-Link DVA-5592 Specifications

General

Wireless Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
LAN Ports	4 x Gigabit Ethernet
WAN Port	1 x Gigabit Ethernet
VoIP	Yes
Weight	500 g
DSL	VDSL2
Security Features	WPA/WPA2, Firewall
Antennas	Internal Antennas