DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Remote IP
Enter the public IP address of the remote subnet VPN gateway.
MTU
The maximum size of units transmitted from the remote host to the
router.
Allow traffic GRE →
LAN
Move the switch to the right to allow GRE tunnel users access
devices in the remote local subnet.
Static route settings
Remote LAN IP address
The IP address of the remote local subnet.
Remote LAN mask
The mask of the remote local subnet.
Remote GRE interface
IP address
The IP address of the GRE tunnel interface in the remote subnet.
After configuring all needed settings, click the APPLY button.
To edit the parameters of an existing tunnel, in the Tunnels section, select the relevant tunnel in the
table. On the opened page, change the needed parameters and click the APPLY button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the DELETE button ( ).
Page 140 of 311
To Next Page
Loading...
