DXS-1210 Series Smart Managed Switch CLI Reference Guide
103
Switch(config)# show dhcp retry times
DHCP Retry Times: 10
Note: DHCP retry interval: 5 seconds
Switch(config)#
12-7 show ip dhcp interface
This command is used to display the DHCP related settings on the interface.
show ip dhcp interface [INTERFACE-ID]
Parameters
INTERFACE-ID Specifies the interface ID.
Default
None.
Command Mode
EXEC Mode
Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the DHCP related settings on the interface.
Example
This example shows how to display the DHCP related settings on the interface.
Switch(config)# show ip dhcp interface
Interface vlan1
DHCP Client Client-ID:
Class ID String:
Host Name:
Lease:
Total Entries: 1
Switch(config)#
To Next Page
Loading...
