D-Link DXS-1210-16TC - Show Environment

DXS-1210 Series Smart Managed Switch CLI Reference Guide
14
show history
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Commands entered are recorded by the system. A recorded command can be recalled by pressing
CTRL+P or the Up Arrow key which will recall previous commands in sequence. The history buffer
size is fixed at 20 commands.
The function key instructions, below, displays how to navigate the command in the history buffer.
• CTRL+P or the Up Arrow key - Recalls commands in the history buffer, beginning with the
most recent command. Repeat the key sequence to recall successively older commands.
• CTRL+N or the Down Arrow key - Returns to more recent commands in the history buffer
after recalling commands with Ctrl-P or the Up Arrow key. Repeat the key sequence to recall
successively more recent commands.
Example
This example shows how to display the command buffer history.
Switch# show history
help
history
Switch#
2-7 show environment
This command is used to display fan, temperature, power availability and status information.
show environment [fan | temperature]
Parameters
fan
(Optional) Specifies to display the Switch fan detailed status.
temperature
(Optional) Specifies to display the Switch temperature detailed status.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.