D-Link DXS-1210-16TC - Show Ip Igmp Snooping Statistics

DXS-1210 Series Smart Managed Switch CLI Reference Guide
155
Switch# show ip igmp snooping mrouter
VLAN Ports
-------- ----------------------------------
1 3/0/3-3/0/4 (static)
3/0/6 (forbidden)
4/0/2 (dynamic)
2 4/0/4 (static)
4/0/3 (dynamic)
Total Entries: 2
Switch#
20-15 show ip igmp snooping static-group
This command is used to display IGMP snooping statistics group information on the Switch.
show ip igmp snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
(Optional) Specifies the group IP address to be displayed.
vlan VLAN-ID
(Optional) Specifies the VLAN ID to be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the IGMP snooping static group information.
Example
This example shows how to display IGMP snooping static group information.
Switch#show ip igmp snooping static-group
VLAN ID Group address Interface
------- --------------- ------------------------
2 226.1.2.2 1/0/3
Total Entries: 1
Switch#
20-16 show ip igmp snooping statistics
This command is used to display IGMP snooping statistics information on the Switch.