DXS-1210 Series Smart Managed Switch CLI Reference Guide
16
Switch#show unit
Model Descr Model Name
------------------------------------------- ------------------
No module description DXS-1210-12SC
Serial-Number Status Up Time
--------------------------------- --------- -----------------
ok 0DT6H32M18S
Memory Total Used Free
-------- ---------- ---------- ----------
DRAM 131072 K 66567 K 64505 K
FLASH 29937 K 7799 K 22138 K
Switch#
2-9 show cpu utilization
This command is used to display the CPU utilization information.
show cpu utilization
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the system’s CPU utilization information in 5second, 1minute, and 5 minute
intervals.
Example
This example shows how to display the information about CPU utilization.
Switch#show cpu utilization
CPU Utilization
Five seconds - 8 % One minute - 7 % Five minutes - 7 %
Switch#
2-10 show version
This command is used to display the Switch’s software version information.
To Next Page
Loading...
Need help?
General