D-Link DXS-1210-16TC - Page 18

DXS-1210 Series Smart Managed Switch CLI Reference Guide
15
Usage Guideline
If the type is not specified, all types of environment information will be displayed.
Example
This example shows how to display fan, temperature, power availability and status information.
Switch#show environment
Detail Temperature Status:
Temperature Descr/ID Current/Threshold Range
------------------------------------------------------
Central Temperature/1 27C/11~79C
Status code: * temperature is out of threshold range
Detail Fan Status:
--------------------------------------------------------------
Right Fan 1 (OK) Right Fan 2 (OK)
Switch#
2-8 show unit
This command is used to display information about system units.
show unit
Parameters
UNIT-ID
(Optional) Specify the unit to display.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the system modules. If no option is specified, then all of
units’ information will be displayed.
Example
This example shows how to display the information about units on a system.