DXS-1210 Series Smart Managed Switch CLI Reference Guide
390
Appendix D - IETF RADIUS Attributes Support
Remote Authentication Dial-In User Service (RADIUS) attributes carry specific authentication,
authorization, information and configuration details for the request and reply. This appendix lists the
RADIUS attributes currently supported by the switch.
RADIUS attributes are supported by the IETF standard and Vendor-Specific Attribute (VSA). VSA
allows the vendor to create an additionally owned RADIUS attribute. For more information about D-
Link VSA, refer to the RADIUS Attributes Assignment Appendix.
IETF standard RADIUS attributes are defined in the RFC 2865 Remote Authentication Dial-In User
Service (RADIUS), RFC 2866 RADIUS Accounting, RFC 2868 RADIUS Attributes for Tunnel Protocol
Support, and RFC 2869 RADIUS Extensions.
The following table lists the IETF RADIUS attributes supported by the D-Link switch.
RADIUS Authentication Attributes:
Number IETF Attribute
1 User-Name
2 User-Password
18 Reply-Message
24 State
26 Vendor-Specific
27 Session-Timeout
29 Termination-Action
64 Tunnel-Type
65 Tunnel-Medium-Type
79 EAP-Message
80 Message-Authenticator
81 Tunnel-Private-Group-ID
To Next Page
Loading...
