D-Link DXS-1210-16TC - Appendix A - System Log Entries

DXS-1210 Series Smart Managed Switch CLI Reference Guide
374
Appendix A - System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the
System Log of this switch.
802.1X
Log Description Severity
Event description: 802.1X Authentication failure.
Log Message: 802.1X authentication fails from (Username: <username>, Port:
<interface-id>, MAC: <mac-address>)
Parameters description:
username: The user that is being authenticated..
interface-id: The switch interface number.
mac-address: The MAC address of the authenticated device.
Warning
Event description: 802.1X Authentication successful.
Log Message: 802.1X authentication succeeds from (Username: <username>,
Port: <interface-id>, MAC: <mac-address>)
Parameters description:
username: The user that is being authenticated.
interface-id: The interface name.
mac-address: The MAC address of the authenticated device.
Informational
AAA
Log Description Severity
Event description: This log will be generated when RADIUS assigned a invalid
VLAN ID attributes.
Log Message: Invalid vlan assignment by radius with vlan <vid>, port
<interface-id>
Parameters description:
vid: The invalid assign VLAN ID that authorized by from RADIUS
server.
interface–id: It indicates the port number of the client authenticated.
Warning
Event description: This log will be generated when RADIUS assigned a invalid
priority attributes.
Log Message: Invalid port default 802.1p assignment by radius with 802.1p:
<priority>, port < interface -id>
Parameters description:
priority: The invalid assign priority that authorized by from RADIUS
server.
interface–id: It indicates the port number of the client authenticated.
Warning
Event description: This log will be generated when RADIUS assigned a invalid
bandwidth attributes.
Log Message: Invalid bandwidth assignment by radius with type <direction>
rate <threshold>, port <interface -id>
Parameters description:
direction: It indicates the direction for bandwidth control, e.g.: TX or RX.
threshold: The invalid assign threshold of bandwidth that authorized by
Warning