D-Link DXS-1210-16TC Reference Guide

DXS-1210 Series Smart Managed Switch CLI Reference Guide
260
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the best routes that are currently at work.
Example
This example shows how to display the routing table.
Switch#show ip route
Code: C - connected, S - static
* - candidate default
Gateway of last resort is not set
C 10.0.0.0/8 is directly connected, vlan1
Total Entries: 1
Switch#
33-4 show ip route summary
This command is used to display the brief information for the working routing entries.
show ip route summary
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the brief information for the working routing entries.
Example
This example shows how to display the IP route entries.

D-Link DXS-1210-16TC Specifications

General

Brand	D-Link
Model	DXS-1210-16TC
Category	Switch
Language	English