D-Link DXS-1210-16TC Reference Guide

DXS-1210 Series Smart Managed Switch CLI Reference Guide
165
Switch#
Switch# show interfaces ethernet 1/0/1-8 counters errors
Port Align-Err Fcs-Err UnderSize OutDiscard Carri-Sen
--------- -------- --------- ---------- ---------- -------
eth1/0/1 0 0 0 0 0
eth1/0/2 0 0 0 0 0
eth1/0/3 0 0 0 0 0
eth1/0/4 0 0 0 0 0
eth1/0/5 0 0 0 0 0
eth1/0/6 0 0 0 0 0
eth1/0/7 0 0 0 0 0
eth1/0/8 0 0 0 0 0
Port Single-Col Multi-Col Late-Col Excess-Col SQETest-Err
--------- -------- --------- ---------- ---------- ------
eth1/0/1 0 0 0 0 0
eth1/0/2 0 0 0 0 0
eth1/0/3 0 0 0 0 0
eth1/0/4 0 0 0 0 0
eth1/0/5 0 0 0 0 0
eth1/0/6 0 0 0 0 0
eth1/0/7 0 0 0 0 0
eth1/0/8 0 0 0 0 0
Port DeferredTx IntMacTx IntMacRx
--------- ---------- -------- ----------
eth1/0/1 0 0 0
eth1/0/2 0 0 0
eth1/0/3 0 0 0
eth1/0/4 0 0 0
eth1/0/5 0 0 0
eth1/0/6 0 0 0
eth1/0/7 0 0 0
eth1/0/8 0 0 0
total entries: 8
Switch#
21-8 show interfaces status
This command is used to display the Switch’s port connection status.
show interfaces [INTERFACE-ID [,|-]] status
Parameters
INTERFACE-ID
(Optional) Specifies the interface ID. If no interface is specified, the
connection status of all switch ports will be displayed.
Default
None.
Command Mode

D-Link DXS-1210-16TC Specifications

General

Brand	D-Link
Model	DXS-1210-16TC
Category	Switch
Language	English