D-Link DXS-1210-16TC - Safeguard Engine Commands

DXS-1210 Series Smart Managed Switch CLI Reference Guide
284
36. Safeguard Engine Commands
36-1 cpu-protect safeguard
This command is used to enable or configure the Safeguard Engine. Use the no form of this
command to disable the Safeguard Engine.
cpu-protect safeguard
no cpu-protect safeguard
Default
By default, Safeguard Engine is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The Safeguard Engine can help the overall operability of the device by minimizing the workload of the
Switch while the attack is ongoing, thus making it capable to forward essential packets over its
network in a limited bandwidth.
Example
This example shows how to enable the Safeguard Engine.
Switch# configure terminal
Switch(config)#cpu-protect safeguard
Switch(config)#
36-2 show cpu-protect safeguard
This command is used to display the settings and status of the Safeguard Engine.
show cpu-protect safeguard
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the settings and status of the Safeguard Engine.
Example