D-Link DXS-1210-16TC - Show Aaa; Show Radius Statistics

DXS-1210 Series Smart Managed Switch CLI Reference Guide
78
Switch#configure terminal
Switch(config)#tacacs-server host 172.19.10.100 port 1500 timeout 8 key ABCDE
Switch(config)# tacacs-server host 172.19.122.3 port 1600 timeout 3 key ABCDE
Switch(config)#aaa group server tacacs+ group2
Switch(config-sg-tacacs+)# server 172.19.10.100
Switch(config-sg-tacacs+)# server 172.19.122.3
Switch(config-sg-tacacs+)# exit
Switch(config)#
7-8 show aaa
This command is used to display the AAA global state.
show aaa
Parameters
None.
Default
None.
Command Mode
Privilege EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the AAA global state.
Example
This example shows how to display the AAA global state.
Switch# show aaa
AAA is enabled.
Switch#
7-9 show radius statistics
This command is used to display RADIUS statistics for accounting and authentication packets.
show radius statistics
Parameters
None.
Default
None.
Command Mode