D-Link DXS-1210-16TC - Page 113

DXS-1210 Series Smart Managed Switch CLI Reference Guide
110
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the DHCP server screening profile settings.
Example
This example shows how to display DHCP server screening profile settings.
Switch# show dhcp-server-screen profile
Profile Name Client MAC
-------------------------------- -----------------
campus 00-08-01-02-03-04
campus 00-08-01-03-00-01
Total Entries: 2
Switch#
13-10 show dhcp-server-screen profile
This command is used to display information about the DHCP server screening profile settings.
show dhcp-server-screen profile
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the DHCP server screening profile settings.
Example
This example shows how to display DHCP server screening profile settings.