DXS-1210 Series Smart Managed Switch CLI Reference Guide
136
Default
The default guard timer is 500 milliseconds.
The default hold-off timer is 0 second.
The default WTR timer is 5 minutes.
Command Mode
G.8032 Profile Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to configure timers for an ERP domain.
Example
This example shows how to configure guard timer to 700 for the profile campus.
Switch#configure terminal
Switch(config)# erps profile campus
Switch (config-erps-profile)# timer guard 700
To Next Page
Loading...
