DXS-1210 Series Smart Managed Switch CLI Reference Guide
175
neighbor
(Optional) Specifies to display neighbor information.
load-balance
(Optional) Specifies to display the load balance information.
sys-id
(Optional) Specifies to display the system identifier that is being used
by LACP.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If a port-channel number is not specified, all port-channels will be displayed. If the channel, load-
balance and sys-id keywords are not specified with the show channel-group command, only
summary channel-group information will be displayed.
Example
This example shows how to display the detailed information of all port-channels.
To Next Page
Loading...
