D-Link DXS-1210-16TC - Page 226

DXS-1210 Series Smart Managed Switch CLI Reference Guide
223
Switch# show ipv6 mld snooping mrouter
VLAN Ports
----- -----------------------------
4094 1/0/12 (forbidden)
Total Entries: 3
Switch#
28-15 show ipv6 mld snooping static-group
This command is used to display MLD snooping static group information on the Switch.
show ipv6 mld snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
Specifies the group IPv6 address to be displayed.
vlan VLAN-ID
Specifies the VLAN ID to be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the MLD snooping static group information.
Example
This example shows how to display MLD snooping static group information .
Switch#show ipv6 mld snooping static-group
VLAN ID Group address Interface
------- --------------- ------------------------
1 FF1E::1 1/0/1,1/0/5
Total Entries: 1
Switch#
28-16 show ipv6 mld snooping statistics
This command is used to display MLD snooping statistics information on the Switch.
show ipv6 mld snooping statistics vlan [VLAN-ID]