D-Link DXS-1210-16TC - Page 257

DXS-1210 Series Smart Managed Switch CLI Reference Guide
254
Switch# configure terminal
Switch(config)#interface eth1/0/1
Switch(config-if)# power-saving eee
Switch(config-if)#
32-4 power-saving dim-led time-range
This command is used to configure the timerange profile for the dim LED schedule. Use the no form
of this command to delete the specified timerange profile.
power-saving dim-led time-range PROFILE-NAME
no power-saving dim-led time-range PROFILE-NAME
Parameters
PROFILE-NAME
Specifies the name of the timerange profile to be configured. The
maximum length is 32 characters.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to add or delete a time range profile for the dim LED schedule. When the schedule
is up, all port’s LED will be turned off.
Example
This example shows how to add a time-range profile for the dim LED schedule.
Switch# configure terminal
Switch(config)#power-saving dim-led time-range off-duty
Switch(config)#
32-5 power-saving hibernation time-range
This command is used to configure the timerange profile for the system hibernation schedule. Use the
no form of this command to delete the specified timerange profile.
power-saving hibernation time-range PROFILE-NAME
no power-saving hibernation time-range PROFILE-NAME
Parameters
PROFILE-NAME
Specifies the name of the timerange profile to be configured. The
maximum length is 32 characters.
Default