DXS-1210 Series Smart Managed Switch CLI Reference Guide
272
Switch# show mls qos interface eth 1/0/1-2 queue-rate-limit
eth1/0/1
QID Min Bandwidth Max Bandwidth
---- -------------- -------------
0 - -
1 16 kbps 10%(100000 kbps)
2 32 kbps -
3 2% 50%
4 64 kbps -
5 64 kbps -
6 32 kbps -
7 - 128 kbps
eth1/0/2
QID Min Bandwidth Max Bandwidth
---- -------------- -------------
0 - -
1 16 kbps -
2 32 kbps -
3 32 kbps -
4 64 kbps -
5 64 kbps -
6 32 kbps -
7 - 128 kbps
Switch#
This example shows how to display the DSCP to CoS map for port 1/0/1.
Switch# show mls qos interface ethernet 1/0/1 dscp-cos-map
eth1/0/1
CoS DSCP List
---- ----------
0 0-7
1 8-15
2 16-23
3 24-31
4 32-39
5 40-47
6 48-55
7 56-63
Switch#
34-9 show mls qos queueing
This command is used to display the QoS queuing information and weight configuration for different
scheduler algorithm on specified interface(s).
show mls qos queuing [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
(Optional) Specifies the interface ID on which the weight configuration
of different scheduler.
,
(Optional)Specifies a series of interfaces, or separate a range of
To Next Page
Loading...
